Description

This connector discovers the Environmental, Physical Disk, Logical Disk, Management Network Cards and Fibre Ports on P2000 / MSA Series Filers. We recommend setting the collection interval for all MSA Disk arrays to at least 15 minutes to prevent the management card from being overloaded.

Connector ID: HPDotHill

This connector is superseded by:

• HPP2000WBEM

This connector supersedes:

• MIB2

Target

Typical platform: HP StorageWorks MSA P2000

Operating system: Storage System

Prerequisites

Leverages: HP MSA Management Card

Technology and protocols: SSH

This connector is not available for the local host (it is applicable to remote hosts only).

Examples

hws HOSTNAME -t storage -f HPDotHill --ssh -u USER

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: storage
  selectedConnectors: [ HPDotHill ] # Optional, to load only this connector
  ssh:
    username: <USERNAME> # Change with actual credentials
    password: <PASSWORD> # Encrypted using hws-encrypt

Connector Activation Criteria

The HP MSA 2000 & P2000 connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

• SSH is enabled on the monitored host
• The monitored host sends a prompt
• The connector sends set cli-parameters pager off[Return]
• The monitored host sends another prompt
• The connector sends versions[Return]
• The monitored host sends another prompt
• The connector sends exit[Return]
• The captured output contains \(Storage Controller CPU Type\)\|\(Controller . Versions\) (regex)