Back to the list of connectors

Huawei Storage System (OceanStor)

Connector file name: MS_HW_HuaweiStorage.hdf

Description

This connector discovers the enclosure(s) and the disks of Huawei Storage Systems as well as the various environment sensors (temperatures, fans, power supplies). It relies on the SNMP protocol.

Target

Typical platform: Huawei OceanStor

Operating system: Storage System

Prerequisites

Leverages: Huawei Storage System SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Huawei Storage System (OceanStor) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.34774.4.1.23.5.6.1 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • Model
  • Serial Number
  • Vendor
  • Status
Battery (MS_HW_BATTERY)
    • Status
    Fan (MS_HW_FAN)
      • Status
      Logical Disk, RAID (MS_HW_LOGICALDISK)
      • Size
      • Type
      • Status
      • Unallocated Space
      Network Card, FC Port (MS_HW_NETWORK)
      • Physical Address
      • Physical Address Type
      • Type
      • Link Status
      • Status
      Other Device (MS_HW_OTHERDEVICE)
      • Additional Information 1
      • Device Type
      • Status
      Physical Disk (MS_HW_PHYSICALDISK)
      • Additional Information 1
      • Additional Information 2
      • Additional Information 3
      • Firmware Version
      • Model
      • Serial Number
      • Size
      • Type
      • Vendor
      • Status
      Power Supply (MS_HW_POWERSUPPLY)
      • Additional Information 1
      • Additional Information 2
      • Status
      Keywords:
      hardware hdf patrol connectors