-
Home
- Hardware Sentry KM for PATROL
Release Notes
This page lists the new features, improvements, changes and bug fixes in each version of Hardware Sentry.
Hardware Sentry KM for PATROL 11.4.01
4 Changes - Released 2024-06-04Changes and Improvements
| ID | Description |
|---|---|
| MSHW-6070 | Added Collection Hub handler status to Hub Report |
| MSHW-6069 | The performance of the CollectionHub has been improved |
Fixed Issues
| ID | Description |
|---|---|
| MSHW-6074 | Unnecessary messages sent to BHOM because of frequent MetaConfigVar updates |
| MSHW-6068 | The Monitoring Report displays an estimated value for Power Consumption even when the Connector's status is detected as Failed. |
Hardware Connectors 36
9 Changes - Released 2024-01-24Changes and Improvements
| ID | Description |
|---|---|
| HC-1618 | Modified power_state metric to match new standard in all existing connectors |
Fixed Issues
| ID | Description |
|---|---|
| HC-1624 | NetApp E-Series: Incorrect statuses are reported for some devices like batteries, memory modules, etc. |
| HC-1620 | VMware ESXi - Disks (IPMI) and VMware ESXi - Disks (VMware) connectors are not compatible with ESXi version 8 |
| HC-1613 | Generic UPS: Incorrect values and thresholds are reported for Voltages |
| HC-1611 | Fujitsu-Siemens Serverview (WBEM): Memory size is incorrect |
| HC-1609 | Dell iDRAC9 (REST): Some statuses may be incorrectly reported as Failed |
| HC-1608 | IBM Storwize Disk Arrays (SSH): Physical disks are not discovered |
| HC-1604 | Dell CMC (Dell Chassis Management Controller) and Dell MX7000 Chassis: Power consumption is not computed |
| HC-1545 | HP Synergy: Power consumption is not collected at the chassis level |
Hardware Sentry KM for PATROL 11.4.00
5 Changes - Released 2024-01-24Changes and Improvements
| ID | Description |
|---|---|
| MSHW-6062 | Added new parameter to report the host ambient temperature |
| MSHW-6053 | The performance of the CollectionHub has been improved |
| MSHW-6051 | Power state is now reported for enclosures |
Fixed Issues
| ID | Description |
|---|---|
| MSHW-6059 | The Test Report does not provide the actual error when a WMI test fails |
| MSHW-5910 | Remote computer enclosures are not labelled correctly |
Hardware Sentry KM for PATROL 11.3.03
11 Changes - Released 2023-10-25Changes and Improvements
| ID | Description |
|---|---|
| MSHW-6045 | Improved the Connector Test Report message |
| MSHW-6031 | Added support for aes256-ctr encrypted private keys |
| MSHW-6024 | Web UI: Ability to enable debug for specific hosts |
| MSHW-6020 | Debug log files can be compressed in a single file when debug ends |
| MSHW-6019 | The removedObjectList configuration variable no longer requires a host ID to be specified |
Fixed Issues
| ID | Description |
|---|---|
| MSHW-6044 | The collected values for host's memory and logical disk size are incorrectly reported as '0' |
| MSHW-6033 | Events generated by instances of MS_HW_REPORT appear as HardwareProblem |
| MSHW-6010 | When the server is shut down, the power consumption displayed in the hardware report does not match the power consumption of the enclosure |
| MSHW-6006 | The MetaFQDN set by the user is not taken into account when the connector specifies an alternate MetaFQDN |
| MSHW-6004 | Dell EMC VMAX (WBEM): Monitors are incorrectly attached to the SMI-S provider device instead of the storage system |
| MSHW-5870 | Alert Actions: An unwanted semi-colon character is added at the end of the Connector Problems event description |
Hardware Connectors 35
13 Changes - Released 2023-09-08What's New
| ID | Description |
|---|---|
| HC-1586 | Added support for VMware 8 |
Changes and Improvements
| ID | Description |
|---|---|
| HC-1603 | The MS_HW_HPBladeTelnet.hdf connector has been renamed to MS_HW_HPBladeSSH.hdf |
| HC-1602 | The MS_HW_CiscoTelnet.hdf connector has been renamed to MS_HW_CiscoSSH.hdf |
| HC-1600 | The MS_HW_HPBladeSystem.hdf connector's display name has been updated to display its protocol |
| HC-1598 | The IBM Netfinity Manager connectors (MS_HW_IbmNetfinityManager, MS_HW_IbmNetfinityManagerBASIC, MS_HW_IbmNetfinityManagerRAID) are deprecated: Systems relying on the IBM Netfinity Manager Agent are no longer supported |
| HC-1597 | The HP TopTools connector (MS_HW_HPTopToolsNT) is deprecated: Systems relying on the HP TopTools Agent are no longer supported |
| HC-1596 | The HP TopTools NetRAID connector (MS_HW_HpNetRaidController) is deprecated: Systems relying on the HP TopTools NetRaid Agent are no longer supported |
| HC-1595 | The IBM Director 4 connectors (MS_HW_Director4Linux, MS_HW_Director4NT) are deprecated: Systems relying on IBM Director Agent v4 are no longer supported |
| HC-1594 | The IBM Director 3 connector (MS_HW_Director3NT) is deprecated: Systems relying on IBM Director Agent v3 are no longer supported |
| HC-1592 | Dell PowerSwitch S-Series: Added support for more networking switch models |
Fixed Issues
| ID | Description |
|---|---|
| HC-1587 | HP iLO Gen 10 (REST): Unneeded discovery of empty power supplies slots, mapped-out memory failure not detected, and false missing alerts on network cards |
| HC-1564 | Quantum DXi (SSH): Wrong computation during many hardware object’s collect |
| HC-1552 | Generic UPS: PowerConsumption is not available |
Hardware Connectors 34
7 Changes - Released 2023-07-26What's New
| ID | Description |
|---|---|
| HC-1536 | Added support for HP Qumulo via Python |
Changes and Improvements
| ID | Description |
|---|---|
| HC-1559 | The Motherboard Monitor connector (MS_HW_MBMNT.hdf) is deprecated: Systems with Motherboard Monitor are no longer supported |
| HC-1553 | The HP MP/GSP card connector (MS_HW_HPiLO.hdf) is deprecated: HP MP and GSP cards and older HP-UX and SuperDome systems are no longer supported |
| HC-1543 | Huawei OceanStor (REST): Connector now activates on more OceanStor systems |
Fixed Issues
| ID | Description |
|---|---|
| HC-1549 | Hitachi Configuration Manager (REST)/Hitachi G-Series (REST): Incorrect Type and missing Model on Cache Flash Memories |
| HC-1548 | EMC Unity SMI-S Agent: False missing device alerts |
| HC-1546 | EMC VPLEX Version 5/6: False missing alarms on Power Supplies, Fans and Memories |
Hardware Connectors 33
1 Changes - Released 2023-06-12Fixed Issues
| ID | Description |
|---|---|
| HC-1539 | Minor regressions in v32 connectors: Adaptec - StorMan - RAID, HP Insight Management Agent - Fiber Array, SMI-S Compliant RAID Controller - Linux, HP Synergy - REST and Promise FastTrack |
Hardware Connectors 32
11 Changes - Released 2023-06-07What's New
| ID | Description |
|---|---|
| HC-1519 | Telnet: Support for interactive Telnet protocol is removed and replaced with single-step SSH commands |
Changes and Improvements
| ID | Description |
|---|---|
| HC-1527 | Disk controllers batteries are now grouped under their disk controllers |
| HC-1526 | HP iLO Gen 9 and 10 (REST): Added fan speed (in percentage) |
| HC-1517 | Added support for HP Qumulo |
Fixed Issues
| ID | Description |
|---|---|
| HC-1533 | HP iLO Gen 9 and 10 (REST): Temperature thresholds are incorrect |
| HC-1530 | HP iLO Gen 9 and 10 (REST): Power Consumption and Status are not collected on some blades |
| HC-1529 | EMC Isilon Cluster (REST): Batteries that are not installed are now excluded from the discovery |
| HC-1523 | Libre Hardware Monitor: Faulty chip reports inaccurate temperatures |
| HC-1521 | Hitachi G Series (REST): Failed physical disks are reported with an "Unknown" status |
| HC-1518 | EMC Unity SMI-S Agent: False missing alarms are generated on all devices |
| HC-1507 | HP Synergy (REST): Local physical disks are missing and blade's names are not set |
Hardware Connectors 31
3 Changes - Released 2023-01-23Fixed Issues
| ID | Description |
|---|---|
| HC-1513 | Oracle/Sun ILOM (SSH) times out unexpectedly |
| HC-1512 | SuperMicro (REST): Fix Basic Authentication issue |
| HC-1509 | Dell EMC PowerVault (REST) does not activate when enabling hardware monitoring through Storage Analyzer KM |
Hardware Sentry KM for PATROL 11.3.01
3 Changes - Released 2022-11-09Changes and Improvements
| ID | Description |
|---|---|
| MSHW-5993 | A warning is triggered if no components can be monitored for a host |
| MSHW-5979 | Added support for SHA256 authentication |
Fixed Issues
| ID | Description |
|---|---|
| MSHW-5996 | Security vulnerability in Swagger UI (OpenAPI) when displaying the documentation through Monitoring Studio |
Hardware Connectors 30
10 Changes - Released 2022-11-08What's New
| ID | Description |
|---|---|
| HC-1492 | Added support for Pure Storage REST API with token authentication |
| HC-1484 | Added support for Dell EMC PowerVault (REST) |
| HC-1476 | Added support for Hitachi Systems (REST) |
| HC-1469 | Added support for HPE Primera (WBEM) |
Changes and Improvements
| ID | Description |
|---|---|
| HC-1503 | EMC Isilon Cluster (REST): Added device ID to the physical disk's display name |
| HC-1501 | Cisco UCS C-Series CIMC (SNMP): Added support for temperature sensors |
Fixed Issues
| ID | Description |
|---|---|
| HC-1502 | Synology Diskstation: Physical disk failures are not reported |
| HC-1497 | Hitachi SVP SMI-S Agent: The connector erroneously creates 2 separate devices |
| HC-1490 | HPE Synergy: Disk controller's "OK" status may incorrectly trigger false alarms |
| HC-1392 | EMC Isilon Cluster (REST): Status is not properly interpreted |
Hardware Sentry KM for PATROL 11.3.00
21 Changes - Released 2022-08-01Changes and Improvements
| ID | Description |
|---|---|
| MSHW-5976 | The verification of a protocol's status automatically increases the corresponding protocol executions counter |
| MSHW-5973 | Hardware Report: New parameters to report the status of IPMI and HTTP protocols |
| MSHW-5951 | Improved WMI collection performance |
| MSHW-5939 | Support deactivation of agent-side collection from a Monitoring Policy |
| MSHW-5930 | CPU's power consumption can now be reported when available |
| MSHW-5911 | Support for GPUs (Graphics Processing Units) monitoring |
| MSHW-5906 | Support for VMs (Virtual Machines) monitoring |
| MSHW-5905 | Improved stability of data collect via IPMI-over-LAN |
| MSHW-5904 | Green IT: Added support for multitenancy |
Fixed Issues
| ID | Description |
|---|---|
| MSHW-5969 | Web UI: Custom action buttons may be missing |
| MSHW-5960 | Impossible to download the MS_HW_thresholdtemplate.csv file from the User Documentation |
| MSHW-5952 | In some rare cases, Internal Issues may incorrectly trigger HardwareProblem events |
| MSHW-5948 | The localhost IP address is displayed when no IP is provided for a host, enclosure or virtual machine |
| MSHW-5942 | Web UI: The SMTP Server information is not saved |
| MSHW-5933 | Connector detection may fail with SNMP v2c and SNMP v3 requests |
| MSHW-5917 | Web UI: Sudo cannot be configured for localhost monitoring |
| MSHW-5913 | Hardware Sentry TSPS Component: Cannot deploy packages from TSPS when several PATROL Agents are running on the same host |
| MSHW-5898 | GreenIT: Devices are not displayed in the Hardware Devices view on TSPS v11.3.01 |
| MSHW-5895 | VMware ESXi: WBEM connection failure when using Java 11 or later (WBEMException: HTTP 400 - Bad Request) |
| MSHW-5893 | Devices with long IDs may trigger false missing alerts upon PATROL Agent restart |
| MSHW-5860 | Web UI v10.2.00 and older: Console shows Internal Error 500 when querying instances with '#' in their path |
Hardware Connectors 29
4 Changes - Released 2022-07-11What's New
| ID | Description |
|---|---|
| HC-1479 | Added support for KVM, Xen and QEMU hypervisors |
Changes and Improvements
| ID | Description |
|---|---|
| HC-1483 | WMI - Network: Added bandwidth utilization and network traffic in bytes |
| HC-1481 | IPMI: Added information for batteries and several other devices |
Fixed Issues
| ID | Description |
|---|---|
| HC-1485 | APC UPS: Voltages and Battery remaining time are reported with the wrong unit |
Hardware Connectors 28
7 Changes - Released 2022-06-23Changes and Improvements
| ID | Description |
|---|---|
| HC-1471 | Synology: Monitoring of system and disk temperatures |
| HC-1470 | Libre Hardware Monitor: Monitoring of CPU power consumption |
Fixed Issues
| ID | Description |
|---|---|
| HC-1480 | Libre Hardware Monitor: Missing Voltage value |
| HC-1475 | Nvidia-Smi: Objects are not discovered |
| HC-1474 | Oracle/Sun ZFS Storage Appliance: The appliance is not discovered |
| HC-1473 | Nvidia-Smi: Incorrect warning and alarm thresholds on Fan Speed causes false alert |
| HC-1472 | HP Synergy-REST: Connections remain permanently open |
Hardware Connectors 27
13 Changes - Released 2022-06-07What's New
| ID | Description |
|---|---|
| HC-1466 | Added support for Proxmox hypervisors |
| HC-1464 | Added support for Hyper-V servers |
| HC-1460 | Added support for Eaton PDUs |
| HC-1456 | Added support for Raritan PDUs |
| HC-1455 | Added support for RFC-1628 compliant UPS (SNMP) |
| HC-1391 | Added support for Arista switches |
Changes and Improvements
| ID | Description |
|---|---|
| HC-1462 | APC UPS connector now supersedes the Generic UPS connector |
Fixed Issues
| ID | Description |
|---|---|
| HC-1465 | Cisco UCS C-Series CIMC (SNMP): Connector Activation Criteria are not met by certain UCS-C hosts |
| HC-1461 | Cisco UCS B-Series (SNMP): Empty memory slots reported as Failed or Inoperable modules |
| HC-1459 | Cisco MDS9000 Series (SSH): Gaps in data collection for Network Interfaces |
| HC-1458 | HP iLO Gen 10 (REST): No alert triggered for LinkStatus when the port gets unplugged |
| HC-1457 | WMI - LUN: Connector activates unnecessarily when MPIO configuration is empty |
| HC-1427 | Huawei Servers: Negative values are reported for temperatures |
Hardware Connectors 26
17 Changes - Released 2022-02-24What's New
| ID | Description |
|---|---|
| HC-1448 | Added support for APC PDU |
| HC-1446 | Added support for Windows Storage Spaces (WMI) - NVMe, disk temperature sensors, logical disks |
| HC-1436 | Added support for Dell EMC PowerStore (REST) |
| HC-1428 | Added support for Dell S-Series network switches (SNMP) |
| HC-1406 | VMware ESXi: Added discovery of Virtual Machines and their respective power consumption |
| HC-1354 | Added support for APC UPS |
| HC-863 | Added support for Huawei OceanStor (REST) |
Changes and Improvements
| ID | Description |
|---|---|
| HC-1440 | Dell iDRAC - Storage: Added firmware version for physical disks |
| HC-1439 | Lenovo IMM (SNMP): Added firmware version for physical disks |
| HC-1437 | Libre Hardware Monitor reports the GPU utilization |
| HC-1403 | Dell MCX Chassis and Blades: Blades are not instantiated when multiple Chassis are discovered from the same Management Module |
Fixed Issues
| ID | Description |
|---|---|
| HC-1453 | HP iLO Gen 10 (REST): Collection Error Count is constantly in Alarm |
| HC-1452 | VMware ESXi - Virtual Machines (SNMP): Connector may activate on unsupported versions of Hardware Sentry |
| HC-1450 | LibreHardwareMonitor: Temperature sensors are incorrectly reported on Intel CPUs |
| HC-1449 | WMI - Network: Virtual and WAN adapters are discovered and misreported as Ethernet cards |
| HC-1444 | HP iLO Gen 9 and 10 (REST): Unknown statuses trigger false alarms |
| HC-1441 | Nvidia-smi: Connector fails to discover GPU and related devices |
Hardware Connectors 25
13 Changes - Released 2021-10-27What's New
| ID | Description |
|---|---|
| HC-1433 | Added support for Cisco UCS (REST) |
| HC-1425 | Added support for Quantum i40/i80 Tape Libraries |
| HC-1416 | Consumer-Grade Hardware: Added support for lm-sensors |
| HC-1411 | Consumer-Grade Hardware: Added support for Libre Open Hardware |
| HC-1408 | HP Synergy - REST: Added physical disks monitoring and disk enclosures display name improved |
| HC-1394 | Added support for Nvidia GPUs through nvidia-smi (GeForce, Tesla, GRID, Quadro, Titan) |
| HC-1080 | Fujitsu-Siemens PRIMERGY: Added Power Consumption monitoring |
Fixed Issues
| ID | Description |
|---|---|
| HC-1429 | Cisco UCS C-Series CIMC (SNMP): Connector Activation Criteria are not met by certain UCS-C hosts |
| HC-1424 | IBM DS6000/8000 Disk Arrays: Invalid WBEM query for the OtherDevice and NetworkCard classes |
| HC-1413 | Hitachi Blade Symphony: Incorrect alarm threshold for temperatures |
| HC-1409 | Lenovo IMM (SNMP): Fan speed percent is not collected |
| HC-1407 | Lenovo IMM (SNMP): Discovery/Collection fails when SNMP requests time out |
| HC-1405 | Dell Compellent Storage Manager - Unisphere For Storage Center: Unconfigured and unplugged ports are incorrectly reported as failed |
Hardware Connectors 24
10 Changes - Released 2021-07-13What's New
| ID | Description |
|---|---|
| HC-1390 | Added support for HP ProCurve switches |
| HC-1386 | Added support for Juniper NetScreen (SNMP) |
| HC-1385 | Added support for Extreme Networks Switches (SNMP) |
| HC-1384 | Added support for Aruba Network Switches (SNMP) |
| HC-1380 | Added support for Cisco Entity Sensor MIB (SNMP) |
Changes and Improvements
| ID | Description |
|---|---|
| HC-1402 | The constructor MIB-based connector supersedes the SNMP generic network connector |
| HC-1387 | HP3PAR: Added FC Port errors monitoring |
| HC-1378 | Added connectors to provide enclosure to Network Switches |
| HC-1079 | Dell PowerEdge (iDRAC9): Added Power Consumption monitoring and improved performance |
Fixed Issues
| ID | Description |
|---|---|
| HC-1382 | Oracle/Sun Solaris - Network: Connector does not report the duplex-mode properly |
Hardware Sentry KM for PATROL 11.2.01
1 Changes - Released 2021-03-25Changes and Improvements
| ID | Description |
|---|---|
| MSHW-5887 | Make the list of devices optional in CMA policy for global settings |
Hardware Connectors 23
3 Changes - Released 2021-03-18What's New
| ID | Description |
|---|---|
| HC-1369 | Added support for HPE ProLiant Gen 9 and 10 via iLO REST |
| HC-1049 | Added support for HPE Synergy chassis |
| HC-634 | Added support for Cisco UCS blade components through Cisco UCS Manager SNMP agent |
Hardware Sentry KM for PATROL 11.2.00
3 Changes - Released 2021-03-18Changes and Improvements
| ID | Description |
|---|---|
| MSHW-5855 | Monitors associated to failed connectors can be automatically removed |
| MSHW-5428 | A capacity with the appropriate unit is now displayed for Logical Disks, Memory Modules, and Physical Disks |
Fixed Issues
| ID | Description |
|---|---|
| MSHW-5883 | Reports scheduling requires a PATROL Agent restart to be taken into account when using the Classic Console |
Hardware Sentry KM for PATROL 11.1.00
37 Changes - Released 2021-02-04What's New
| ID | Description |
|---|---|
| MSHW-5748 | Ability to interact with Hardware Sentry KM through TSPS |
Changes and Improvements
| ID | Description |
|---|---|
| MSHW-5866 | The initial discovery process is significantly faster |
| MSHW-5865 | The Threshold Management Mode selection mechanism is removed from the Web UI to simplify and improve the overall thresholds management |
| MSHW-5864 | The /SENTRY/HARDWARE/ThresholdsManagementMode and /SENTRY/HARDWARE/removeAllThresholds configuration variables are removed |
| MSHW-5822 | Green IT - Link KVM hosts to Groups, Applications and Services |
| MSHW-5818 | Hardware Sentry TSPS Component: Database session validation at startup |
| MSHW-5811 | Installing the TSPS Component in an HA environment is now detailed in the user documentation |
| MSHW-5807 | Hardware Sentry TSPS Component: Added Monitor's filter in the Device Details page |
| MSHW-5806 | Power Consumption format and unit reviewed |
| MSHW-5804 | Hardware Sentry TSPS Component: Enhanced UI rendering |
| MSHW-5803 | Improved TSPS Component OpenAPI documentation |
| MSHW-5794 | The Endurance Remaining parameter now reported for Physical Disks |
| MSHW-5791 | Added the %{DEVICE_HOSTNAME} macro variable to report the actual monitored system behind a proxy |
| MSHW-5752 | Reset (on monitors with an ErrorCount parameter) |
| MSHW-5751 | Remove (on missing devices) |
| MSHW-5750 | Rediscover |
| MSHW-5749 | Collect Now |
| MSHW-5745 | Hardware Views in TSPS: Monitoring link added to the device details view |
| MSHW-5744 | Reinitialize |
| MSHW-5741 | Green IT extension: The Tree View in the Monitors Tab of the Device Details page is fully responsive |
| MSHW-5739 | Green IT - Update of parameter graphs of the device details / monitor details pages |
| MSHW-5738 | Green IT - Link Hyper-V VM hosts to Groups, Applications and Services |
| MSHW-5528 | Classic Wizard: Added sudo options to the SSH configuration of storage devices |
| MSHW-5423 | Added Build Number, Commit ID and Version to infoboxes |
| MSHW-5295 | PSL diagnostic : hostsInfo() displays the MetaFQDN instead of FQDN |
| MSHW-4866 | FQDN added to the hardware inventory report |
Fixed Issues
| ID | Description |
|---|---|
| MSHW-5859 | Annotations are missing after a reinitialize KM with reset Alert Action |
| MSHW-5857 | Network Link Alert : LinkSpeed is overwritten by the collect |
| MSHW-5814 | TSPS Component: Temperature is not displayed in the Monitors tab when in WARN or ALARM state |
| MSHW-5813 | Sudo option doesn't work with the WEB UI |
| MSHW-5812 | Hardware Sentry TSPS Component - Graphs may display negative values |
| MSHW-5810 | TSPS Component: Monitors tab appears empty becaused of unhandled value for Status Information |
| MSHW-5802 | IPMI-over-LAN monitoring no longer works in CMA mode |
| MSHW-5747 | Green IT Summary Graphs are not displayed when PATROL Agents are offline for a long time |
| MSHW-5746 | TSPS Component causes high CPU utilization on RSSO server |
| MSHW-5742 | Hardware Views in TSPS: Status and Present graphs are not properly displayed |
| MSHW-5351 | The discovery is not launched automatically after the MS_HW_CONNECTOR's parameters (TestReport and Status) change from failed to OK |
Hardware Sentry KM for PATROL 11.0.01
1 Changes - Released 2020-10-20Fixed Issues
| ID | Description |
|---|---|
| MSHW-5735 | Green IT cannot retrieve hardware information from PATROL Agent running Hardware Sentry KM for PATROL v11.0.00 or lower |
Hardware Sentry KM for PATROL 10.2.01
2 Changes - Released 2020-01-30Fixed Issues
| ID | Description |
|---|---|
| MSHW-5449 | HTTP-based connectors may stop working after upgrading to version 10.2.00 |
| MSHW-5448 | Event generated for the Present parameter even though missing device detection has been disabled |
Hardware Sentry KM for PATROL 10.2.00
19 Changes - Released 2020-01-14What's New
| ID | Description |
|---|---|
| MSHW-5377 | General improvements of the main collection engine |
| MSHW-5376 | Expose Hardware Sentry specific features in Monitoring Studio X Web UI |
| MSHW-5375 | Add top level class representing the KM, different from the class representing the monitored hosts |
Changes and Improvements
| ID | Description |
|---|---|
| MSHW-5385 | Ensure 10.1.00 CMA policies are properly handled by 10.2.00 code |
| MSHW-5384 | Create the MS_HW_KM class |
| MSHW-5383 | [Web UI] Add the ability to configure KM settings |
| MSHW-5382 | [Web UI] Add the ability to create hosts |
| MSHW-5381 | [Web UI] Expose all options to reinitialize KM in |
| MSHW-5369 | CMA interface for Alert Action: Add the option to write a line to a log file |
| MSHW-5368 | SSH: Add Support for SHA2 algorithms for HMAC and Kex |
| MSHW-5358 | Configuring hosts to monitor in a CMA policy allows special characters that breaks the discovery |
| MSHW-5357 | It is possible to specify a file containing the list of hosts to monitor |
| MSHW-5352 | automaticReinitialization now uses options set in defaultReinitializationOptions |
| MSHW-5347 | Allow Embedded File Type/Extension Specification in HDF Files |
Fixed Issues
| ID | Description |
|---|---|
| MSHW-5399 | Alert Actions: Email Alert Action cannot be configured when a threshold is reached. |
| MSHW-5362 | Hardware Inventory Report appends irrelevant information to Memory Size |
| MSHW-5354 | get_ranges errors occurred when the Temperature parameter of the MS_HW_TEMPERATURE class was not activated |
| MSHW-5343 | N times comes to default after a KM reinitialize for linkspeed parameter |
| MSHW-5338 | Voltage Refresh Parameters Menu Does Not Refresh |
Hardware Sentry KM for PATROL 10.1.01
4 Changes - Released 2018-05-04Fixed Issues
| ID | Description |
|---|---|
| MSHW-5334 | The Remove KM Command does not work on the Batteries container |
| MSHW-5330 | "Invalid [...] value" error messages may occur on non-US English systems |
| MSHW-5329 | Monitoring of several devices with different credentials through HTTP REST API may fail randomly |
| MSHW-5321 | When using the PATROL Classic Console, reinitializing the KM does not empty oldInstances.dat and missing devices are re-created |
Hardware Sentry KM for PATROL 10.1.00
16 Changes - Released 2018-02-20Changes and Improvements
| ID | Description |
|---|---|
| MSHW-5276 | Performance improvement in AWK processing (no external process) |
| MSHW-5263 | Performance optimization in the discovery process setting the alert thresholds |
| MSHW-5243 | Scalability improvement in the collection process |
| MSHW-5188 | Internal KM Issue Notification no longer triggers PATROL Events unless specified otherwise |
| MSHW-5166 | Improved discovery performance: The discovery process now creates an instance file for each monitored host |
| MSHW-5165 | New configuration variable (deactivatePowerConsumptionEstimation) to deactivate the power consumption estimation |
| MSHW-5158 | The Hardware Health Report, automatically generated when a PATROL Event occurs, now provides additional information about the system impacted by a hardware failure or a threshold breach. |
| MSHW-5152 | Performance significantly improved when monitoring a large number of systems |
| MSHW-5146 | The product uses the most recent JRE available and prefers 64-bit versions over 32-bit versions when it is automatically selected. |
Fixed Issues
| ID | Description |
|---|---|
| MSHW-5289 | Monitored host not displayed as a separate device in TrueSight Operations when hostname cannot be resolved |
| MSHW-5250 | When monitoring remote systems through SSH, the SSH client would not properly terminate, even after stopping/restarting PATROL Agent. |
| MSHW-5221 | Updates of Global Variables in policies not taken into account until the PATROL Agent was restarted. |
| MSHW-5203 | The TestReport parameter did not show the output of the command for the IPMI availability test |
| MSHW-5202 | The rediscover() agent query prevented the host credentials from being properly stored when the host was rediscovered |
| MSHW-5181 | StatusInformation parameter wrongly reports a LEDIndicator set to 2 as Off instead of On |
| MSHW-5172 | Removing a connector from a Host Group through KM Commands does not work |
Hardware Sentry KM for PATROL 10.0.01
5 Changes - Released 2018-01-04Fixed Issues
| ID | Description |
|---|---|
| MSHW-5132 | Connectors for Storage systems no longer work when leveraging a locally installed instrumentation layer |
| MSHW-5126 | Password may appear in plain text when a command times out or fails |
| MSHW-5114 | The ProtocolStatus-Command parameter triggers a false alarm for certain remote hosts |
| MSHW-5108 | Timeout error when monitoring remote IBM AIX systems through SSH |
| MSHW-5101 | Temporary files are not deleted on remotely monitored systems through SSH |
Hardware Sentry KM for PATROL 10.0.00
34 Changes - Released 2017-12-22Changes and Improvements
| ID | Description |
|---|---|
| MSHW-4999 | TrueSight CMA mode is used only if an applicable policy is enabled in CMA |
| MSHW-4993 | MS_HW_q allows you to dump the PATROL namespace in TrueSight Agent Query |
| MSHW-4974 | MS_HW_q allows you to list the installed components and their versions (including Hardware Connectors) |
| MSHW-4967 | Default value for Unexpected Status Management in TrueSight CMA is now "OK" |
| MSHW-4947 | MS_HW_q allows you to enable the Debug Mode for individual hosts in TrueSight Agent Query |
| MSHW-4939 | Specific events are now triggered by default (rather than STD/41) to allow events to be forwarded with custom content |
| MSHW-4932 | Annotations with comprehensive report of the problem when an alert is triggered is now enabled by default in TrueSight CMA policies |
| MSHW-4916 | Support for Java 9 |
| MSHW-4907 | Support for SSH keyboard-interactive authentication |
| MSHW-4832 | Device information (as in Infoboxes) is now exposed in TrueSight Operations |
| MSHW-4831 | MS_HW_q allows you to interact with the KM in TrueSight Agent Query (reinitialize, debug, pause, resume, remove, refresh, acknowledge, report, etc.) |
| MSHW-4811 | It is now possible to configure a specific FQDN for a monitored host |
| MSHW-4791 | Link Speed greater than 20 GB/s was considered as invalid value and ignored |
| MSHW-4777 | Java Settings are easier to configure with more detailed options |
| MSHW-4770 | Configuration variable (snmpRetryIntervals) has been added to specify the interval in milliseconds at which the SNMP client must retry its requests until a response is received or the timeout is reached |
| MSHW-4763 | It is now possible to specify the monitoring of several hosts at once, sharing the same configuration and credentials |
| MSHW-4751 | A new MS_HW_REPORT class provides detailed information about the operation of the KM (self-monitoring) |
| MSHW-4745 | Protocols can be enabled individually for each host and are monitored with specific parameters |
| MSHW-4734 | Java 8 is required for the product to operate properly |
| MSHW-4728 | Remote monitoring through telnet is no longer supported (will use SSH instead of previously configured hosts with telnet) |
| MSHW-4691 | A new option allows you to automatically clean-up the list of previously discovered devices when the agent starts |
| MSHW-4683 | Event messages are no longer limited to 2048 characters |
| MSHW-4651 | Parameter LEDIndicator is added to MS_HW_LED class to report on the state of the LED (On, Off or Blinking) |
| MSHW-4650 | Cisco UCS monitoring: Use MS_HW_CiscoUcsXmlQuery.jar by default on both Windows and Unix/Linux |
| MSHW-4576 | Add support for HTTP and REST API-instrumented devices |
| MSHW-4573 | Added remote monitoring of a Windows host from another Windows host through commands |
Fixed Issues
| ID | Description |
|---|---|
| MSHW-5043 | In the "Edit Settings" wizard for localhost, WMI credentials cannot be left blank when PATROL Agent configured to run as LOCALSYSTEM |
| MSHW-5029 | Settings for 'sudo' in a TrueSight CMA policy were not honored for IPMI |
| MSHW-4870 | Debug output did not show the output of a command that fails in timeout |
| MSHW-4789 | ErrorPercent could report values greater than 100% |
| MSHW-4676 | SNMPv3 with SHA authentication does not work |
| MSHW-4675 | After a certain time, the product failed to process SSH, SNMP, or WBEM responses that exceeded a certain size and a certain execution time |
| MSHW-4671 | Java processes would sometimes keep on running after a restart of the PATROL Agent preventing proper KM upgrades |
| MSHW-4643 | Deleting a single host via KM Commands may wipe out the whole Hardware configuration |
Search Results for {{siteSearch | truncate:'50'}}
{{resultArray.length}}
No results.