Aruba (SNMP)

Home

Back to the list of connectors

Description

This connector discovers the enclosure and Ethernet ports of a system equipped with an MIB-2 standard SNMP Agent.

Connector ID: Aruba

This connector supersedes:

Target

Typical platform: Aruba

Operating system: Network Device

Prerequisites

Leverages: MIB-2 Standard SNMP Agent

Technology and protocols: SNMP

Examples

CLI

hws HOSTNAME -t network -f Aruba --snmp v2c --community public

hws-config.yaml

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: network
  selectedConnectors: [ Aruba ] # Optional, to load only this connector
  snmp:
    version: v1 # Read documentation for v2 and v3
    community: public # or probably something more secure

Connector Activation Criteria

The Aruba (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

An SNMP Get-Next on the OID 1.3.6.1.4.1.14823.2.2.1.2 must return a value in the same subtree

Metrics

Type	Collected Metrics	Specific Attributes (Labels)
Enclosure	`hw.status{hw.type="enclosure",state="present"}`	`model` `type` `vendor`
Fan	`hw.status{hw.type="fan",state="ok\|degraded\|failed"}` `hw.status{hw.type="fan",state="present"}`
Network Card, FC Port	`hw.errors{hw.type="network"}` `hw.network.bandwidth.limit` `hw.network.bandwidth.utilization` `hw.network.io{direction="receive"}` `hw.network.io{direction="transmit"}` `hw.network.packets{direction="receive"}` `hw.network.packets{direction="transmit"}` `hw.network.up` `hw.status{hw.type="network",state="ok\|degraded\|failed"}` `hw.status{hw.type="network",state="present"}`	`physical_address`
Power Supply	`hw.status{hw.type="power_supply",state="ok\|degraded\|failed"}` `hw.status{hw.type="power_supply",state="present"}`
Temperature Sensor	`hw.status{hw.type="temperature",state="ok\|degraded\|failed"}` `hw.status{hw.type="temperature",state="present"}` `hw.temperature`

Search Results for {{siteSearch | truncate:'50'}}

No results.