Cisco UCS B-Series (SNMP)

Description

This connector provides hardware monitoring for the Cisco B-Series Servers via SNMP agent of UCS Manager. It does not connect to the blades themselves

Connector ID: CiscoUCSBladeSNMP

This connector is superseded by:

CiscoUCSRest

Target

Typical platform: Cisco B-Series Servers

Operating system: Out-of-Band

Prerequisites

Leverages: Cisco UCS Manager SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Examples

CLI

hws HOSTNAME -t management -f CiscoUCSBladeSNMP --snmp v2c --community public

hws-config.yaml

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: management
  selectedConnectors: [ CiscoUCSBladeSNMP ] # Optional, to load only this connector
  snmp:
    version: v1 # Read documentation for v2 and v3
    community: public # or probably something more secure

Connector Activation Criteria

The Cisco UCS B-Series (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

An SNMP Get-Next on the OID 1.3.6.1.4.1.9.9.719.1.9.2.1.2 must return a value in the same subtree

Metrics

Type	Collected Metrics	Specific Attributes (Labels)
Enclosure	`hw.status{hw.type="enclosure",state="ok\|degraded\|failed"}` `hw.status{hw.type="enclosure",state="present"}`	`model` `serial_number` `vendor`
Disk Controller	`hw.status{hw.type="disk_controller",state="ok\|degraded\|failed"}` `hw.status{hw.type="disk_controller",state="present"}`	`firmware_version` `model` `serial_number` `vendor`
Processor	`hw.cpu.speed.limit{limit_type="max"}` `hw.status{hw.type="cpu",state="ok\|degraded\|failed"}` `hw.status{hw.type="cpu",state="present"}`	`model` `vendor`
Memory Module	`hw.memory.limit` `hw.status{hw.type="memory",state="ok\|degraded\|failed"}` `hw.status{hw.type="memory",state="present"}`	`info` `serial_number`
Physical Disk	`hw.physical_disk.size` `hw.status{hw.type="physical_disk",state="ok\|degraded\|failed"}` `hw.status{hw.type="physical_disk",state="present"}`	`model` `vendor`

Search Results for {{siteSearch | truncate:'50'}}

No results.