Back to the list of connectors
Cisco UCS C-Series CIMC (SNMP)
Description
This connector provides hardware monitoring for the Cisco C-Series Servers with CIMC cards via SNMP
Connector ID: CiscoUCSCIMC
This connector is superseded by:
Target
Typical platform: Cisco UCS
Operating system: Out-of-Band
Prerequisites
Leverages: Cisco CIMC
Technology and protocols: SNMP
This connector is not available for the local host (it is applicable to remote hosts only).
Examples
CLI
hws HOSTNAME -t management -f CiscoUCSCIMC --snmp v2c --community public
hws-config.yaml
hosts:
- host:
hostname: <HOSTNAME> # Change with actual host name
type: management
selectedConnectors: [ CiscoUCSCIMC ] # Optional, to load only this connector
snmp:
version: v1 # Read documentation for v2 and v3
community: public # or probably something more secure
Connector Activation Criteria
The Cisco UCS C-Series CIMC (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- An SNMP Get-Next on the OID
1.3.6.1.4.1.9.9.719.1.41.9
must return a value in the same subtree - An SNMP Get on the OID
1.3.6.1.2.1.1.1.0
must return a value that matches with theCisco Integrated Management Controller
regular expression
Metrics
Type | Collected Metrics | Specific Attributes (Labels) |
---|---|---|
Enclosure |
|
|
Disk Controller |
|
|
Battery |
|
|
Processor |
|
|
Fan |
|
|
Memory Module |
|
|
Other Device |
|
|
Physical Disk |
|
|
Power Supply |
|
|
Temperature Sensor |
|
|
Search Results for {{siteSearch | truncate:'50'}}
{{resultArray.length}}
No results.