DELL PowerSwitch S-Series

Home

Back to the list of connectors

Description

This connector provides hardware monitoring through the switch's SNMP Agent

Connector ID: DellNetworkSwitch

Target

Typical platform: DELL PowerSwitch S4000 Series

Operating system: Network Device

Prerequisites

Leverages: Switch's SNMP agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Examples

CLI

hws HOSTNAME -t network -f DellNetworkSwitch --snmp v2c --community public

hws-config.yaml

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: network
  selectedConnectors: [ DellNetworkSwitch ] # Optional, to load only this connector
  snmp:
    version: v1 # Read documentation for v2 and v3
    community: public # or probably something more secure

Connector Activation Criteria

The DELL PowerSwitch S-Series connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

An SNMP Get-Next on the OID 1.3.6.1.4.1.674.10895.3000.1.2.100.2 must return a value in the same subtree and contains Dell.*\(Networking\)\|\(Ethernet\) (regex)

Metrics

Type	Collected Metrics	Specific Attributes (Labels)
Enclosure	`hw.enclosure.energy` `hw.status{hw.type="enclosure",state="ok\|degraded\|failed"}` `hw.status{hw.type="enclosure",state="present"}`	`info` `bios_version` `model` `serial_number` `type` `vendor`
Fan	`hw.fan.speed` `hw.status{hw.type="fan",state="ok\|degraded\|failed"}` `hw.status{hw.type="fan",state="present"}`
Power Supply	`hw.status{hw.type="power_supply",state="ok\|degraded\|failed"}` `hw.status{hw.type="power_supply",state="present"}`

Search Results for {{siteSearch | truncate:'50'}}

No results.