IBM TS3100 Tape Libraries

Home

Back to the list of connectors

Description

This connector monitors IBM TS3100 tape libraries through SNMP.

Connector ID: IBMTS3100

Target

Typical platform: IBM TS3100 Tape Library

Operating system: Storage System

Prerequisites

Leverages: IBM SNMP Agent SNMP Agent (IBM-3100-MIB)

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Examples

CLI

hws HOSTNAME -t storage -f IBMTS3100 --snmp v2c --community public

hws-config.yaml

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: storage
  selectedConnectors: [ IBMTS3100 ] # Optional, to load only this connector
  snmp:
    version: v1 # Read documentation for v2 and v3
    community: public # or probably something more secure

Connector Activation Criteria

The IBM TS3100 Tape Libraries connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

An SNMP Get-Next on the OID 1.3.6.1.4.1.2.6.210.2 must return a value in the same subtree

Metrics

Type	Collected Metrics	Specific Attributes (Labels)
Enclosure	`hw.status{hw.type="enclosure",state="ok\|degraded\|failed"}` `hw.status{hw.type="enclosure",state="present"}`	`info` `bios_version` `model` `type` `vendor`
Robotics	`hw.status{hw.type="robotics",state="ok\|degraded\|failed"}` `hw.status{hw.type="robotics",state="present"}`	`info` `model` `robotic_type` `serial_number` `vendor`
Tape Drive	`hw.errors{hw.type="tape_drive"}` `hw.status{hw.type="tape_drive",state="present"}` `hw.tape_drive.operations{type="mount"}`	`info` `model` `serial_number` `vendor`

Search Results for {{siteSearch | truncate:'50'}}

No results.