Description

This connector provides information about physical disks and volumes for Adaptec SAS RAID controllers through the arcconf utility.

Connector file name: MS_HW_AdptStorManUnix.hdf

Target

Typical platform: Any system with Adaptec

Operating systems: Oracle Solaris, Linux

Prerequisites

Leverages: arcconf

Technology and protocols: System Commands

This connector requires advanced privileges on the managed host for the command below:

• /[opt|usr]/StorMan/arcconf

This connector therefore needs to run as root or you need to configure a privilege-escalation mechanism like sudo on the managed host to allow the monitoring account to run the command listed above.

Sample of /etc/sudoers to allow the above command to be run as root by the patrol account:

patrol ALL=(root) NOPASSWD: /[opt|usr]/StorMan/arcconf

Connector Activation Criteria

The Adaptec - StorMan - RAID connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

• Operating System is Oracle Solaris or Linux
• The command below succeeds on the monitored host
  • Command: /bin/sh %EmbeddedFile(1)%
  • Output contains: Hard drive (regex)