Back to the list of connectors

Cisco MDS9000 Series (SSH)

Description

This connector discovers the enclosure and fiber-channel ports of SAN switches as well as various environment sensors (temperatures, fans, power supplies, etc.).

Connector file name: MS_HW_CiscoSSH.hdf

This connector supersedes:

Target

Typical platform: Cisco SAN

Operating system: Storage System

Prerequisites

Leverages: Commands on the Cisco Bay Controller

Technology and protocols: System Commands

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Cisco MDS9000 Series (SSH) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: show version
    • Output contains: Cisco (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Model
  • Serial Number
  • Type
  • Vendor
Blade (MS_HW_BLADE)
  • Status
  • Blade Model
  • Blade Name
Fan (MS_HW_FAN)
  • Status
    Network Card, FC Port (MS_HW_NETWORK)
    • Bandwidth Utilization
    • Duplex Mode
    • Error Percent
    • Link Speed
    • Link Status
    • Received Bytes Rate
    • Received Packets Rate
    • Status
    • Transmitted Bytes Rate
    • Transmitted Packets Rate
    • Zero Buffer Credit Percent
    • Device Type
    • Physical Address
    • Physical Address Type
    Other Device (MS_HW_OTHERDEVICE)
    • Status
    • Device Type
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
      • Temperature
      • Alarm Threshold
      • Warning Threshold
      Keywords:
      hardware hdf patrol connectors
      No results.