Back to the list of connectors

Cisco UCS C-Series CIMC (SNMP)

Description

This connector enables hardware monitoring for the Cisco C-Series Servers with CIMC cards via SNMP.

Connector file name: MS_HW_CiscoUCSCIMC.hdf

This connector is superseded by:

Target

Typical platform: Cisco UCS

Operating system: Out-of-Band

Prerequisites

Leverages: Cisco CIMC

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Cisco UCS C-Series CIMC (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.9.9.719.1.41.9 must return a value in the same subtree
  • An SNMP Get on the OID 1.3.6.1.2.1.1.1.0 must return a value that matches with the Cisco Integrated Management Controller regular expression

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Status
  • Model
  • Serial Number
  • Vendor
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Firmware Version
  • Model
  • Serial Number
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
  • Model
  • Vendor
Processor (MS_HW_CPU)
  • Status
  • Maximum Speed
  • Model
  • Vendor
Fan (MS_HW_FAN)
  • Status
    Memory Module (MS_HW_MEMORY)
    • Status
    • Additional Information 1
    • Additional Information 2
    • Serial Number
    • Size
    • Type
    Other Device (MS_HW_OTHERDEVICE)
    • Status
    • Device Type
    Physical Disk (MS_HW_PHYSICALDISK)
    • Status
    • Model
    • Serial Number
    • Size
    • Vendor
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
    • Additional Information 1
    • Additional Information 2
    • Additional Information 3
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Temperature
    • Alarm Threshold
    • Warning Threshold
    Keywords:
    hardware hdf patrol connectors
    No results.