Back to the list of connectors

Dell CMC (Dell Chassis Management Controller)

Description

This connector provides environmental information (temperatures, fans and power supplies) for Dell Blade servers through the Dell Chassis Management Controller (CMC).

Connector file name: MS_HW_DellCMC.hdf

Target

Typical platform: Dell M1000E

Operating system: Out-of-Band

Prerequisites

Leverages: Dell Chassis Management Controller (CMC)

Technology and protocols: System Commands

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Dell CMC (Dell Chassis Management Controller) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: getsysinfo
    • Output contains: CMC Information: (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Status
  • Model
  • Serial Number
  • Type
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Model
Battery (MS_HW_BATTERY)
  • Status
    Blade (MS_HW_BLADE)
    • Power State
    • Status
    • Blade Model
    • Blade Name
    Fan (MS_HW_FAN)
    • Speed
    • Status
    • Alarm Threshold
    • Fan Type/Location
    • Warning Threshold
    Logical Disk, RAID (MS_HW_LOGICALDISK)
    • Status
    • RAID Level
    • Size
    Other Device (MS_HW_OTHERDEVICE)
    • Status
    • Device Type
    Physical Disk (MS_HW_PHYSICALDISK)
    • Predicted Failure
    • Status
    • Serial Number
    • Size
    • Vendor
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
      • Temperature
      • Alarm Threshold
      • Sensor Type/Location
      • Warning Threshold
      Keywords:
      hardware hdf patrol connectors
      No results.