Back to the list of connectors

DELL PowerSwitch S-Series

Description

This connector enables hardware monitoring for Dell Network Switches through the switch's SNMP Agent.

Connector file name: MS_HW_DellNetworkSwitch.hdf

Target

Typical platform: DELL PowerSwitch S4000 Series

Operating system: Network Device

Prerequisites

Leverages: Switch's SNMP agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The DELL PowerSwitch S-Series connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.674.10895.3000.1.2.100.2 must return a value in the same subtree and contains Dell.*\(Networking\)\|\(Ethernet\) (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Status
  • Additional Information 1
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
Fan (MS_HW_FAN)
  • Speed
  • Status
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
      Keywords:
      hardware hdf patrol connectors
      No results.