Back to the list of connectors

Dell PowerVault TL2000/4000 Tape Libraries

Description

This connector enables the monitoring for Dell PowerVault TL2000 and TL4000 tape libraries through SNMP.

Connector file name: MS_HW_DellTL2000.hdf

Target

Typical platform: Dell TL2000/4000 Tape Library

Operating system: Storage System

Prerequisites

Leverages: Dell SNMP Agent (DELL-SHADOW-MIB)

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Dell PowerVault TL2000/4000 Tape Libraries connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.674.10893.2.102.2 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • BIOS Version
  • Model
  • Type
  • Vendor
Robotic (MS_HW_ROBOTICS)
  • Status
  • Additional Information 1
  • Model
  • Type
  • Serial Number
  • Vendor
Tape Drive (MS_HW_TAPEDRIVE)
  • Error Count
  • Mount Count
  • Additional Information 1
  • Model
  • Serial Number
  • Vendor
Keywords:
hardware hdf patrol connectors
No results.