Back to the list of connectors

Dell iDRAC9 (REST)

Description

This connector enables hardware monitoring for Dell iDRAC systems through the Dell's iDRAC Management Card for Dell servers with iDRAC9 or higher. It monitors the enclosure and physical disks, as well as the various environment sensors (CPUs, temperatures, fans, power supplies, memory modules, disk controllers, batteries and network cards).

Connector file name: MS_HW_DelliDRACREST.hdf

This connector supersedes:

Target

Typical platform: iDRAC9 REST

Operating system: Out-of-Band

Prerequisites

Requires KM Version: 10.2.00 or greater

Leverages:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Dell iDRAC9 (REST) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The KM is in version 10.2.00 or greater
  • The HTTP Request below to the managed host succeeds:
    • GET /redfish/v1
    • Request Header:
      EmbeddedFile(1)
    • The response body contains: Integrated Dell Remote Access Controller (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Status
  • Model
  • Serial Number
  • Type
  • Vendor
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Firmware Version
  • Model
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
    Processor (MS_HW_CPU)
    • Status
    • Maximum Speed
    • Model
    • Vendor
    Fan (MS_HW_FAN)
    • Status
      Memory Module (MS_HW_MEMORY)
      • Status
      • Model
      • Serial Number
      • Size
      • Vendor
      Network Card, FC Port (MS_HW_NETWORK)
      • Link Speed
      • Link Status
      • Status
      • Model
      • Physical Address
      • Physical Address Type
      • Serial Number
      • Vendor
      Physical Disk (MS_HW_PHYSICALDISK)
      • Status
      • Model
      • Serial Number
      • Size
      • Vendor
      Power Supply (MS_HW_POWERSUPPLY)
      • Status
      • Additional Information 1
      • Power (Nominal)
      • Power Supply Type
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
      • Temperature
      • Sensor Type/Location
      No results.