Back to the list of connectors

EMC Isilon Cluster (REST)

Description

This connector discovers the status of an EMC Isilon Storage cluster, as well as various environment sensors (temperatures, fans, power supplies, etc.). It requires EMC Isilon (v8) or higher.

Connector file name: MS_HW_EMCIsilonREST.hdf

Target

Typical platform: EMC Isilon

Operating system: Storage System

Prerequisites

Leverages:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The EMC Isilon Cluster (REST) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The HTTP Request below to the managed host succeeds:
    • GET /platform/3/cluster/version
    • The response body contains: Isilon OneFS (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Model
  • Serial Number
  • Type
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
    Processor (MS_HW_CPU)
    • Status
    • Model
    Fan (MS_HW_FAN)
    • Speed
    • Alarm Threshold
    • Warning Threshold
    Logical Disk, RAID (MS_HW_LOGICALDISK)
    • Status
    • Additional Information 1
    • Size
    Network Card, FC Port (MS_HW_NETWORK)
    • Link Status
    • Status
      Physical Disk (MS_HW_PHYSICALDISK)
      • Status
      • Model
      • Serial Number
      • Size
      Power Supply (MS_HW_POWERSUPPLY)
      • Status
      • Additional Information 1
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Temperature
      • Alarm Threshold
      • Warning Threshold
      Voltage Sensor (MS_HW_VOLTAGE)
      • Voltage
      • Lower Threshold
      • Upper Threshold
      Keywords:
      hardware hdf patrol connectors
      No results.