Back to the list of connectors

HP BladeSystem (SSH)

Description

This connector enables hardware monitoring for the HP BladeSystem racks through the Onboard Administrator.

Connector file name: MS_HW_HPBladeSSH.hdf

This connector supersedes:

Target

Typical platform: HP BladeSystem

Operating system: Out-of-Band

Prerequisites

Leverages: HP BladeSystem Onboard Administrator

Technology and protocols: System Commands

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The HP BladeSystem (SSH) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: SHOW OA INFO
    • Output contains: Onboard Administrator (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Status
  • Model
  • Serial Number
  • Type
Blade (MS_HW_BLADE)
  • Power State
  • Status
  • Blade Model
  • Blade Name
  • Serial Number
Fan (MS_HW_FAN)
  • Speed Percent
  • Status
    Other Device (MS_HW_OTHERDEVICE)
    • Status
    • Additional Label
    • Device Type
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
    • Used Capacity
    • Used Capacity
    • Power (Nominal)
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Status
    • Temperature
    • Alarm Threshold
    • Warning Threshold
    Keywords:
    hardware hdf patrol connectors
    No results.