Back to the list of connectors

HPE OneView (Frames and Blades)

Description

This connector enables hardware monitoring for HP Synergy via HPE OneView REST. It monitors Frames enclosure, Gen10 and Gen11 Blades Hardware Servers, Drives Enclosure, Interconnect Devices as well as the various environment sensors (fans, power supplies, memory modules, disk controllers, batteries, network cards). Note: Missing CPUs are reported.

Connector file name: MS_HW_HPESynergy.hdf

Target

Typical platform: HP Synergy

Operating system: Out-of-Band

Prerequisites

Requires KM Version: 10.2.00 or greater

Leverages:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The HPE OneView (Frames and Blades) connector must be selected manually, and its status will be reported as OK if all the below criteria are met:

  • The KM is in version 10.2.00 or greater
  • The HTTP Request below to the managed host succeeds:
    • GET /rest/version
    • Request Header:
      EmbeddedFile(1)
    • The response body contains: minimumVersion (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Status
  • Additional Information 1
  • Model
  • Serial Number
  • Type
  • Vendor
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Serial Number
Battery (MS_HW_BATTERY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Model
  • Vendor
Blade (MS_HW_BLADE)
  • Status
  • Additional Information 1
  • Serial Number
Processor (MS_HW_CPU)
  • Maximum Speed
Fan (MS_HW_FAN)
  • Status
  • Additional Information 1
  • Additional Information 2
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • RAID Level
  • Size
Memory Module (MS_HW_MEMORY)
  • Status
  • Model
  • Size
  • Type
  • Vendor
Network Card, FC Port (MS_HW_NETWORK)
  • Link Speed
  • Link Status
  • Status
  • Additional Information 1
  • Physical Address
  • Serial Number
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Additional Information 1
  • Device Type
Physical Disk (MS_HW_PHYSICALDISK)
  • Endurance Remaining
  • Status
  • Additional Information 1
  • Firmware Version
  • Model
  • Serial Number
  • Size
  • Vendor
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Power (Nominal)
Temperature Sensor (MS_HW_TEMPERATURE)
  • Temperature
  • Alarm Threshold
Keywords:
hardware hdf patrol connectors
No results.