Back to the list of connectors

HP P2000 G3 or Later (WBEM)

Description

This connector discovers physical disks, logical disks, management network cards and fiber ports on P2000 G3 later Series filers through the embedded SMI-S Provider.

Connector file name: MS_HW_HPP2000WBEM.hdf

This connector supersedes:

Target

Typical platform: HP StorageWorks P2000 G3

Operating system: Storage System

Prerequisites

Leverages: HP P2000 Management Card

Technology and protocols: WBEM

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The HP P2000 G3 or Later (WBEM) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The WBEM query below to the managed host succeeds:
    • Namespace: root/hpq
    • WQL Query: SELECT Name FROM HP_TopComputerSystem
  • The WBEM query below to the managed host succeeds:
    • Namespace: root/hpq
    • WQL Query: SELECT Tag FROM HP_TopComputerSystemChassis

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Model
  • Serial Number
  • Type
  • Vendor
Fan (MS_HW_FAN)
  • Status
    Logical Disk, RAID (MS_HW_LOGICALDISK)
    • Status
    • Size
    Network Card, FC Port (MS_HW_NETWORK)
    • Link Speed
    • Link Status
    • Status
    • Physical Address
    • Physical Address Type
    Other Device (MS_HW_OTHERDEVICE)
    • Status
    • Device Type
    Physical Disk (MS_HW_PHYSICALDISK)
    • Status
    • Additional Information 1
    • Additional Information 2
    • Model
    • Serial Number
    • Size
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
        Voltage Sensor (MS_HW_VOLTAGE)
        • Status
          Keywords:
          hardware hdf patrol connectors
          No results.