Back to the list of connectors

HP Qumulo

Description

This connector provides hardware information about HP Qumulo storage systems.

Connector file name: MS_HW_HPQumulo.hdf

Target

Typical platform: HP Qumulo storage systems

Operating system: Storage System

Prerequisites

Leverages: QQ CLI

Technology and protocols: System Commands

This connector requires advanced privileges on the managed host for the command below:

  • qq

This connector therefore needs to run as root or you need to configure a privilege-escalation mechanism like sudo on the managed host to allow the monitoring account to run the command listed above.

Sample of /etc/sudoers to allow the above command to be run as root by the patrol account:

patrol ALL=(root) NOPASSWD: qq

Connector Activation Criteria

The HP Qumulo connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: qq --help
    • Output contains: Qumulo CLI (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Model
  • Serial Number
  • Vendor
Network Card, FC Port (MS_HW_NETWORK)
  • Received Bytes Rate
  • Status
  • Transmitted Bytes Rate
  • Device Type
  • Logical Address
  • Logical Address Type
  • Physical Address
  • Physical Address Type
Physical Disk (MS_HW_PHYSICALDISK)
  • Status
  • Additional Information 1
  • Model
  • Serial Number
  • Size
Keywords:
hardware hdf patrol connectors
No results.