Back to the list of connectors

Hitachi BladeSymphony Chassis

Description

This connector enables hardware monitoring for the Hitachi BladeSymphony Chassis racks through the Hitachi BladeSymphony Chassis Management Module.

Connector file name: MS_HW_HitachiBladeSymphony.hdf

Target

Typical platform: Hitachi BladeSymphony

Operating system: Out-of-Band

Prerequisites

Leverages: Hitachi BladeSymphony Chassis Management Module

Technology and protocols: SNMP

Connector Activation Criteria

The Hitachi BladeSymphony Chassis connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.116.5.39.1.10 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Model
  • Serial Number
  • Type
  • Vendor
Blade (MS_HW_BLADE)
  • Power State
  • Status
  • Additional Information 1
  • Additional Information 2
  • Blade Model
  • Serial Number
Fan (MS_HW_FAN)
  • Speed
  • Status
  • Alarm Threshold
  • Fan Type/Location
LED (MS_HW_LED)
  • Status
  • Status When Off
  • Status When On
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Additional Label
  • Device Type
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Power Supply Type
Temperature Sensor (MS_HW_TEMPERATURE)
  • Status
  • Temperature
  • Additional Information 1
  • Alarm Threshold
Keywords:
hardware hdf patrol connectors
No results.