Back to the list of connectors

Hitachi HNAS (SNMP)

Description

This connector discovers the status of Hitachi HNAS processors, CSW, cache, SM, power supplies, batteries, fans, physical disks and environment sensors.

Connector file name: MS_HW_HitachiHNAS.hdf

Target

Typical platform: Hitachi HNAS

Operating system: Storage System

Prerequisites

Leverages: Hitachi HNAS SNMP Agent

Technology and protocols: SNMP

Connector Activation Criteria

The Hitachi HNAS (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.11096.6.1.1.1.2 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Model
  • Serial Number
  • Type
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
    Fan (MS_HW_FAN)
    • Speed
    • Status
      Logical Disk, RAID (MS_HW_LOGICALDISK)
      • Status
      • Additional Information 1
      • Additional Information 2
      • Additional Information 3
      • RAID Level
      • Size
      Network Card, FC Port (MS_HW_NETWORK)
      • Error Percent
      • Link Speed
      • Link Status
      • Received Packets Rate
      • Transmitted Packets Rate
        Physical Disk (MS_HW_PHYSICALDISK)
        • Status
        • Size
        • Vendor
        Power Supply (MS_HW_POWERSUPPLY)
        • Status
          Temperature Sensor (MS_HW_TEMPERATURE)
          • Status
          • Temperature
            Keywords:
            hardware hdf patrol connectors
            No results.