Back to the list of connectors

Huawei Storage System (OceanStor)

Description

This connector discovers the enclosure(s) and the disks of Huawei storage systems as well as various environment sensors (temperatures, fans, power supplies). It relies on the SNMP protocol.

Connector file name: MS_HW_HuaweiStorage.hdf

This connector is superseded by:

Target

Typical platform: Huawei OceanStor

Operating system: Storage System

Prerequisites

Leverages: Huawei Storage System SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Huawei Storage System (OceanStor) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.34774.4.1.23.5.6.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Model
  • Serial Number
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
    Fan (MS_HW_FAN)
    • Status
      Logical Disk, RAID (MS_HW_LOGICALDISK)
      • Status
      • Unallocated Space
      • Additional Information 1
      • Size
      Network Card, FC Port (MS_HW_NETWORK)
      • Link Status
      • Status
      • Device Type
      • Physical Address
      • Physical Address Type
      Other Device (MS_HW_OTHERDEVICE)
      • Status
      • Additional Information 1
      • Device Type
      Physical Disk (MS_HW_PHYSICALDISK)
      • Status
      • Additional Information 1
      • Additional Information 2
      • Additional Information 3
      • Firmware Version
      • Model
      • Serial Number
      • Size
      • Vendor
      Power Supply (MS_HW_POWERSUPPLY)
      • Status
      • Additional Information 1
      • Additional Information 2
      Keywords:
      hardware hdf patrol connectors
      No results.