Description

This connector provides hardware environment information on IBM CHRP-based AIX systems (temperature sensors, voltage sensors, fans, power supplies).

Connector file name: MS_HW_IBMAIXChrpMachstat.hdf

This connector is superseded by:

• MS_HW_IBMVIOS.hdf

Target

Typical platform: IBM POWER

Operating system: IBM AIX

Prerequisites

Leverages: IBM AIX system commands (machstat)

Technology and protocols: System Commands

This connector requires advanced privileges on the managed host for the commands below:

• /usr/sbin/machstat
• /usr/sbin/bootinfo

This connector therefore needs to run as root or you need to configure a privilege-escalation mechanism like sudo on the managed host to allow the monitoring account to run the commands listed above.

Sample of /etc/sudoers to allow the above commands to be run as root by the patrol account:

patrol ALL=(root) NOPASSWD: /usr/sbin/machstat
patrol ALL=(root) NOPASSWD: /usr/sbin/bootinfo

Connector Activation Criteria

The IBM AIX - CHRP Environment connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

• Operating System is IBM AIX
• The command below succeeds on the monitored host
  • Command: /usr/sbin/bootinfo -p
  • Output contains: ^chrp$ (regex)