Back to the list of connectors

IBM DataPower (SNMP)

Description

This connector discovers the enclosure and the disks of IBM DataPower Appliances as well as various environment sensors (temperatures, fans, power supplies). It relies on the SNMP protocol.

Connector file name: MS_HW_IBMDataPower.hdf

Target

Typical platform: IBM DataPower

Operating system: Out-of-Band

Prerequisites

Leverages: IBM DataPower SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The IBM DataPower (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.14685.3.1.100.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Type
  • Vendor
Fan (MS_HW_FAN)
  • Speed
  • Alarm Threshold
Physical Disk (MS_HW_PHYSICALDISK)
  • Status
  • Model
  • Vendor
Power Supply (MS_HW_POWERSUPPLY)
  • Status
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Temperature
    • Alarm Threshold
    • Warning Threshold
    Voltage Sensor (MS_HW_VOLTAGE)
    • Voltage
    • Lower Threshold
    • Upper Threshold
    Keywords:
    hardware hdf patrol connectors
    No results.