Back to the list of connectors

IBM FlashSystem 900

Description

This connector discovers the enclosure(s) and the disks of IBM FlashSystem 900s as well as various environment sensors (temperatures, fans, power supplies). It relies on the SNMP protocol.

Connector file name: MS_HW_IBMFlash900.hdf

Target

Typical platform: IBM FlashSystem

Operating system: Storage System

Prerequisites

Leverages: IBM FlashSystem 900 SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The IBM FlashSystem 900 connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.2.6.255.1.1.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • Model
  • Type
Blade (MS_HW_BLADE)
  • Status
  • Additional Information 1
  • Blade Model
Fan (MS_HW_FAN)
  • Speed
  • Speed Percent
  • Speed Percent Warning Threshold
  • Warning Threshold
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • RAID Level
  • Size
Network Card, FC Port (MS_HW_NETWORK)
  • Link Speed
  • Link Status
  • Physical Address
  • Physical Address Type
Physical Disk (MS_HW_PHYSICALDISK)
  • Status
  • Additional Information 1
  • Size
Power Supply (MS_HW_POWERSUPPLY)
  • Status
    Keywords:
    hardware hdf patrol connectors
    No results.