Back to the list of connectors

IBM Storwize Disk Arrays (SSH)

Description

This connector discovers the enclosure and the disks of IBM SAN disk arrays through the v7000 cluster's management interface. It also discovers and monitors the FC ports, physical and logical disks of the array.

Connector file name: MS_HW_IBMv7000SSH.hdf

Target

Typical platform: IBM Storwize

Operating system: Storage System

Prerequisites

Leverages: IBM Storwize SSH console

Technology and protocols: System Commands

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The IBM Storwize Disk Arrays (SSH) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: lsenclosure -delim :
    • Output contains: id:status:type:managed:IO_group_id:IO_group_name:product_MTM:serial_number (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
    LED (MS_HW_LED)
    • Status
    • Status When Blinking
    • Status When Off
    • Status When On
    Other Device (MS_HW_OTHERDEVICE)
    • Status
    • Device Type
    Physical Disk (MS_HW_PHYSICALDISK)
    • Status
    • Additional Information 1
    • Additional Information 2
    • Additional Information 3
    • Firmware Version
    • Model
    • Serial Number
    • Size
    • Vendor
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Temperature
        Keywords:
        hardware hdf patrol connectors
        No results.