Back to the list of connectors

Intel Modular Server

Description

This connector enables hardware monitoring for Intel Modular through the Intel Modular Server Chassis Managament Module's SNMP Agents.

Connector file name: MS_HW_IntelModularServer.hdf

Target

Typical platform: Intel Modular

Operating system: Out-of-Band

Prerequisites

Leverages: Intel Server Manager 8 SNMP Agents

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Intel Modular Server connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.343.2.19.1.2.10.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Type
  • Vendor
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Model
Blade (MS_HW_BLADE)
  • Status
    Fan (MS_HW_FAN)
    • Speed
    • Status
    • Alarm Threshold
    • Fan Type/Location
    Network Card, FC Port (MS_HW_NETWORK)
    • Bandwidth Utilization
    • Error Percent
    • Link Speed
    • Link Status
    • Received Bytes Rate
    • Status
    • Transmitted Bytes Rate
    • Physical Address
    • Physical Address Type
    Other Device (MS_HW_OTHERDEVICE)
    • Status
    • Device Type
    Physical Disk (MS_HW_PHYSICALDISK)
    • Predicted Failure
    • Status
    • Additional Information 1
    • Firmware Version
    • Serial Number
    • Size
    • Vendor
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
      Keywords:
      hardware hdf patrol connectors
      No results.