Back to the list of connectors

Ethernet Switch with Sensors (SNMP)

Description

ThiThis connector discovers the enclosure and Ethernet ports of a system equipped with an MIB-2 standard SNMP Agent.

Connector file name: MS_HW_MIB2Switch.hdf

This connector supersedes:

Target

Typical platform: MIB-2 and Entity-Sensor-MIB Supported Switch

Operating system: Network Device

Prerequisites

Leverages: MIB-2, Entity-Sensor-MIB, SNMP

Technology and protocols: SNMP

Connector Activation Criteria

The Ethernet Switch with Sensors (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.2.1.2.2.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
Fan (MS_HW_FAN)
  • Speed
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
Network Card, FC Port (MS_HW_NETWORK)
  • Bandwidth Utilization
  • Error Percent
  • Link Speed
  • Link Status
  • Received Bytes Rate
  • Received Packets Rate
  • Status
  • Transmitted Bytes Rate
  • Transmitted Packets Rate
  • Device Type
  • Physical Address
  • Physical Address Type
Temperature Sensor (MS_HW_TEMPERATURE)
  • Status
  • Temperature
    Voltage Sensor (MS_HW_VOLTAGE)
    • Status
    • Voltage
    • Voltage Type
    Keywords:
    hardware hdf patrol connectors
    No results.