Back to the list of connectors

Pure Storage FA Series (SSH)

Description

This connector monitors environmental sensors, physical disks, management network cards and fiber ports for Pure Storage FA Series arrays. It relies on the SSH protocol.

Connector file name: MS_HW_PureStorage.hdf

This connector is superseded by:

Target

Typical platform: Pure Storage

Operating system: Storage System

Prerequisites

Leverages: Pure Storage Management Card

Technology and protocols: System Commands

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Pure Storage FA Series (SSH) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: puredrive list
    • Output contains: BAY (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Model
  • Vendor
Fan (MS_HW_FAN)
  • Status
    Network Card, FC Port (MS_HW_NETWORK)
    • Link Speed
    • Link Status
    • Status
      Other Device (MS_HW_OTHERDEVICE)
      • Status
      • Device Type
      Physical Disk (MS_HW_PHYSICALDISK)
      • Status
      • Size
      Power Supply (MS_HW_POWERSUPPLY)
      • Status
        Temperature Sensor (MS_HW_TEMPERATURE)
        • Status
        • Temperature
          Keywords:
          hardware hdf patrol connectors
          No results.