Oracle Hardware Management Agent

Description

This connector enables hardware monitoring for Solaris servers through the Oracle Hardware Management Pack which is pre-installed with Solaris and can be installed on Linux/Windows.

Connector file name: MS_HW_SunHwMon.hdf

This connector supersedes:

Target

Typical platform: Oracle/Sun

Operating systems: Microsoft Windows, Linux, Oracle Solaris

Prerequisites

Leverages: Oracle Hardware Management Pack

Technology and protocols: SNMP

Connector Activation Criteria

The Oracle Hardware Management Agent connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

An SNMP Get-Next on the OID 1.3.6.1.4.1.42.2.2.6.1.1.1 must return a value in the same subtree

Monitors

Object Type	Collected Parameters	Discovered Properties
Enclosure (`MS_HW_ENCLOSURE`)	Power Consumption Status	Additional Information 1 Additional Information 2 BIOS Version Model Serial Number Type Vendor
Disk Controller (`MS_HW_DISKCONTROLLER`)	Controller Status Status	Firmware Version Serial Number Vendor
Processor (`MS_HW_CPU`)	Status	Model
Fan (`MS_HW_FAN`)	Speed Status
LED (`MS_HW_LED`)	Status	Status When Blinking Status When Off Status When On
Logical Disk, RAID (`MS_HW_LOGICALDISK`)	Status	RAID Level Size
Memory Module (`MS_HW_MEMORY`)	Status	Model Size
Other Device (`MS_HW_OTHERDEVICE`)	Status	Device Type
Physical Disk (`MS_HW_PHYSICALDISK`)	Status	Additional Information 1 Additional Information 2 Additional Information 3 Model Serial Number Size Vendor
Power Supply (`MS_HW_POWERSUPPLY`)	Status	Power Supply Type
Temperature Sensor (`MS_HW_TEMPERATURE`)	Status Temperature
Voltage Sensor (`MS_HW_VOLTAGE`)	Status Voltage

Search Results for {{siteSearch | truncate:'50'}}

No results.