Back to the list of connectors

Oracle/Sun Xsigo Switch

Description

This connector discovers the enclosure and ports of the Sun Xsigo switch as well as various environment sensors (temperatures, fans, power supplies, etc.). It relies on the SNMP protocol.

Connector file name: MS_HW_SunXsigoSwitch.hdf

This connector supersedes:

Target

Typical platform: Oracle/Sun Xsigo

Operating systems: Storage System, Network Device

Prerequisites

Leverages: Sun Xsigo SNMP Agent

Technology and protocols: SNMP

Connector Activation Criteria

The Oracle/Sun Xsigo Switch connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.24440.3.1.1.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
Fan (MS_HW_FAN)
  • Speed
  • Status
  • Warning Threshold
Network Card, FC Port (MS_HW_NETWORK)
  • Bandwidth Utilization
  • Error Count
  • Link Speed
  • Link Status
  • Received Bytes Rate
  • Received Packets Rate
  • Status
  • Transmitted Bytes Rate
  • Transmitted Packets Rate
  • Device Type
  • Physical Address
  • Physical Address Type
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Label
  • Device Type
Power Supply (MS_HW_POWERSUPPLY)
  • Status
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Temperature
    • Alarm Threshold
    Keywords:
    hardware hdf patrol connectors
    No results.