Back to the list of connectors

Synology Diskstation

Description

This connector monitors the physical components of Synology DiskStation units. It relies on the SNMP Agent of Synology DiskStation Manager (DSM).

Connector file name: MS_HW_Synology.hdf

Target

Typical platform: Synology DiskStation

Operating system: Storage System

Prerequisites

Leverages: Synology DiskStation SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Synology Diskstation connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.6574.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Model
  • Serial Number
  • Type
  • Vendor
Fan (MS_HW_FAN)
  • Status
    Logical Disk, RAID (MS_HW_LOGICALDISK)
    • Status
      Other Device (MS_HW_OTHERDEVICE)
      • Status
        Physical Disk (MS_HW_PHYSICALDISK)
        • Status
        • Additional Information 1
        • Model
        Power Supply (MS_HW_POWERSUPPLY)
        • Status
          Temperature Sensor (MS_HW_TEMPERATURE)
          • Temperature
          • Alarm Threshold
          • Warning Threshold
          Keywords:
          hardware hdf patrol connectors
          No results.