Back to the list of connectors

APC UPS

Description

This connector enables hardware monitoring through APC UPS SNMP interface.

Connector file name: MS_HW_APCUPS.hdf

This connector supersedes:

Target

Typical platform: APC UPS

Operating system: Out-of-Band

Prerequisites

Leverages: UPS SNMP Enabled

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The APC UPS connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get on the OID 1.3.6.1.4.1.318.1.1.1.1.1.1.0 must return a value that matches with the UPS regular expression

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Model
  • Serial Number
  • Type
  • Vendor
Battery (MS_HW_BATTERY)
  • Charge
  • Status
  • Time Left
  • Model
  • Type
  • Vendor
Power Supply (MS_HW_POWERSUPPLY)
  • Used Capacity
  • Power Supply Type
Temperature Sensor (MS_HW_TEMPERATURE)
  • Temperature
  • Alarm Threshold
  • Sensor Type/Location
  • Warning Threshold
Voltage Sensor (MS_HW_VOLTAGE)
  • Voltage
  • Lower Threshold
  • Upper Threshold
  • Voltage Type
Keywords:
hardware hdf patrol connectors
No results.