Back to the list of connectors

Generic UPS

Description

This connector enables hardware monitoring for MIB-2 Standard UPS through an SNMP interface.

Connector file name: MS_HW_GenericUPS.hdf

This connector is superseded by:

Target

Typical platform: Any UPS which supports UPS-MIB (RFC1628)

Operating system: Out-of-Band

Prerequisites

Leverages:

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Generic UPS connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.2.1.33 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Status
  • Additional Information 1
  • Model
  • Type
  • Vendor
Battery (MS_HW_BATTERY)
  • Charge
  • Status
  • Time Left
  • Type
Temperature Sensor (MS_HW_TEMPERATURE)
  • Temperature
  • Alarm Threshold
  • Sensor Type/Location
  • Warning Threshold
Voltage Sensor (MS_HW_VOLTAGE)
  • Voltage
  • Lower Threshold
  • Upper Threshold
  • Voltage Type
Keywords:
hardware hdf patrol connectors
No results.