Back to the list of connectors

Brocade SAN Switch SMI Agent

Description

This connector discovers the enclosures and fiber-channel ports of SAN switches as well as various environment sensors (temperatures, fans, power supplies, etc.). It relies on the Brocade SMI Agent Proxy and can monitor multiple switches.

Connector file name: MS_HW_BrocadeSwitchWBEM.hdf

This connector supersedes:

Target

Typical platform: Brocade SAN

Operating system: Storage System

Prerequisites

Leverages: Brocade SMI Agent

Technology and protocols: WBEM

Connector Activation Criteria

The Brocade SAN Switch SMI Agent connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The WBEM query below to the managed host succeeds:
    • Namespace: root/brocade1
    • WQL Query: SELECT Name FROM Brocade_Switch

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Device Hostname
  • Model
  • Serial Number
  • Type
  • Vendor
Blade (MS_HW_BLADE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Blade Model
  • Serial Number
Fan (MS_HW_FAN)
  • Speed
  • Status
    Network Card, FC Port (MS_HW_NETWORK)
    • Bandwidth Utilization
    • Duplex Mode
    • Error Percent
    • Link Speed
    • Link Status
    • Received Bytes Rate
    • Received Packets Rate
    • Status
    • Transmitted Bytes Rate
    • Transmitted Packets Rate
    • Zero Buffer Credit Percent
    • Additional Information 1
    • Bandwidth
    • Device Type
    • Physical Address
    • Physical Address Type
    Other Device (MS_HW_OTHERDEVICE)
    • Status
    • Device Type
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
      • Temperature
        Keywords:
        hardware hdf patrol connectors
        No results.