Back to the list of connectors

HP Insight Management Agent - Fiber Array

Description

This connector monitors the fiber-connected HP/Compaq StorageWorks Arrays by connecting to the Fiber Array Management SNMP sub-agent of the HP Insight Manager agent.

Connector file name: MS_HW_CpqFCADriveArray.hdf

This connector is superseded by:

This connector supersedes:

Target

Typical platform: HP ProLiant

Operating systems: Microsoft Windows, Linux, HP Tru64, HP OpenVMS, Out-of-Band, Oracle Solaris

Prerequisites

Leverages: HP Insight Management Agents

Technology and protocols: SNMP

Connector Activation Criteria

The HP Insight Management Agent - Fiber Array connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.232.16.2.5.1.1 must return a value in the same subtree
  • An SNMP Get-Next on the OID 1.3.6.1.4.1.232.8.2.2.1.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Type
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Model
Battery (MS_HW_BATTERY)
  • Status
  • Type
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • RAID Level
  • Size
Physical Disk (MS_HW_PHYSICALDISK)
  • Error Count
  • Predicted Failure
  • Status
  • Serial Number
  • Size
  • Vendor
Keywords:
hardware hdf patrol connectors
No results.