Back to the list of connectors

HPE iLO4 (Proliant Gen 8, Gen9)

Description

This connector discovers the status of an HPE Proliant Gen8 and Gen 9 system using iLO 4, as well as various environment sensors (temperatures, fans, power supplies, etc.). Requires iLO 4.

Connector file name: MS_HW_HPEGen9IloREST.hdf

This connector supersedes:

Target

Typical platform: HP Proliant

Operating system: Out-of-Band

Prerequisites

Requires KM Version: 10.3.00 or greater

Leverages:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The HPE iLO4 (Proliant Gen 8, Gen9) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The KM is in version 10.3.00 or greater
  • The HTTP Request below to the managed host succeeds:
    • GET /redfish/v1/
    • Request Header:
      EmbeddedFile(1)
    • The response body contains: iLO 4 (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Power State
  • Status
  • Model
  • Serial Number
  • Type
  • Vendor
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Firmware Version
  • Model
  • Serial Number
Battery (MS_HW_BATTERY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Model
Processor (MS_HW_CPU)
  • Status
  • Maximum Speed
  • Model
  • Vendor
Fan (MS_HW_FAN)
  • Speed Percent
  • Status
  • Additional Information 1
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • RAID Level
  • Size
Memory Module (MS_HW_MEMORY)
  • Status
  • Model
  • Serial Number
  • Size
  • Vendor
Network Card, FC Port (MS_HW_NETWORK)
  • Link Speed
  • Link Status
  • Status
  • Model
  • Physical Address
  • Serial Number
Physical Disk (MS_HW_PHYSICALDISK)
  • Endurance Remaining
  • Status
  • Additional Information 1
  • Firmware Version
  • Model
  • Serial Number
  • Size
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Power (Nominal)
  • Power Supply Type
Temperature Sensor (MS_HW_TEMPERATURE)
  • Status
  • Temperature
  • Additional Information 1
  • Alarm Threshold
  • Warning Threshold
No results.