Back to the list of connectors

EMC Celerra/VNX Unified System (SSH)

Description

This connector enables hardware monitoring for EMC Celerra and EMC VNX Unified Systems by connecting to their Control Server.

Connector file name: MS_HW_EMCCelerra.hdf

This connector supersedes:

Target

Typical platforms: EMC Celerra, EMC VNX Unified

Operating system: Storage System

Prerequisites

Leverages: EMC naviseccli and nas_inventory utilities

Technology and protocols: System Commands

Connector Activation Criteria

The EMC Celerra/VNX Unified System (SSH) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: /nas/bin/nas_inventory
    • Output contains: Error 2100 (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Model
  • Serial Number
  • Type
  • Vendor
Processor (MS_HW_CPU)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Model
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • RAID Level
Memory Module (MS_HW_MEMORY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Model
  • Serial Number
  • Size
  • Type
Network Card, FC Port (MS_HW_NETWORK)
  • Link Speed
  • Link Status
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Device Type
Physical Disk (MS_HW_PHYSICALDISK)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Firmware Version
  • Model
  • Size
  • Vendor
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Power Supply Type
Keywords:
hardware hdf patrol connectors
No results.