Back to the list of connectors

EMC uemcli (VNXe)

Description

This connector enables hardware monitoring for EMC VNXe Storage Systems through the uemcli command line utility.

Connector file name: MS_HW_EMCuemcli.hdf

This connector is superseded by:

Target

Typical platform: EMC VNXe

Operating system: Storage System

Prerequisites

Leverages: uemcli

Technology and protocols: System Commands

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The EMC uemcli (VNXe) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • Operating System is Storage System
  • The command below succeeds on the agent host
    • Command: uemcli -version | more
    • Output contains: Version: (regex)
  • The command below succeeds on the agent host
    • Command: uemcli -d %{HOSTNAME} -u %{USERNAME} -p %{PASSWORD} -sslPolicy accept /sys/general show | more
    • Output contains: Model (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Model
  • Serial Number
  • Type
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
    Fan (MS_HW_FAN)
    • Status
      Memory Module (MS_HW_MEMORY)
      • Status
        Network Card, FC Port (MS_HW_NETWORK)
        • Link Status
        • Status
        • Device Type
        Other Device (MS_HW_OTHERDEVICE)
        • Status
        • Device Type
        Physical Disk (MS_HW_PHYSICALDISK)
        • Status
        • Additional Information 1
        • Additional Information 2
        • Firmware Version
        • Model
        • Serial Number
        • Size
        • Vendor
        Power Supply (MS_HW_POWERSUPPLY)
        • Status
          Keywords:
          hardware hdf patrol connectors
          No results.