Description

This connector discovers and collects hardware data the physical disks connected to a Smart Array controller and any configured logical drive and spare drive.

Connector file name: MS_HW_HPUXSAUtil.hdf

This connector is superseded by:

• MS_HW_HPUXWBEM.hdf

Target

Typical platforms: HP 9000, HP Integrity, HP SuperDome

Operating system: HP-UX

Prerequisites

Leverages: HP-UX Smart Array Configuration Utility

Technology and protocols: System Commands

This connector requires advanced privileges on the managed host for the command below:

• /opt/raidsa/bin/sautil

This connector therefore needs to run as root or you need to configure a privilege-escalation mechanism like sudo on the managed host to allow the monitoring account to run the command listed above.

Sample of /etc/sudoers to allow the above command to be run as root by the patrol account:

patrol ALL=(root) NOPASSWD: /opt/raidsa/bin/sautil

Connector Activation Criteria

The HP-UX - Smart Array RAID connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

• Operating System is HP-UX
• The command below succeeds on the monitored host
  • Command: ls /opt/raidsa/bin/sautil
  • Output contains: sautil$ (regex)
• The command below succeeds on the monitored host
  • Command: /bin/sh %EmbeddedFile(1)%
  • Output contains: [GgTtMm][Bb] (regex)