Back to the list of connectors
NetApp Filer (SNMP)
Description
This connector discovers the enclosure and the disks of NetApp disk arrays (filer) as well as various environment sensors (temperatures, fans, power supplies, etc.). It relies on the SNMP protocol.
Connector file name: MS_HW_NetApp.hdf
This connector supersedes:
Target
Typical platform: NetApp
Operating system: Storage System
Prerequisites
Leverages: NetApp SNMP Agent
Technology and protocols: SNMP
This connector is not available for the local host (it is applicable to remote hosts only).
Connector Activation Criteria
The NetApp Filer (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- An SNMP Get-Next on the OID
1.3.6.1.4.1.789.1.1
must return a value in the same subtree
Monitors
Object Type | Collected Parameters | Discovered Properties |
---|---|---|
Enclosure (MS_HW_ENCLOSURE ) |
|
|
Battery (MS_HW_BATTERY ) |
|
|
Blade (MS_HW_BLADE ) |
|
|
Fan (MS_HW_FAN ) |
|
|
Logical Disk, RAID (MS_HW_LOGICALDISK ) |
|
|
Network Card, FC Port (MS_HW_NETWORK ) |
|
|
Other Device (MS_HW_OTHERDEVICE ) |
|
|
Physical Disk (MS_HW_PHYSICALDISK ) |
|
|
Power Supply (MS_HW_POWERSUPPLY ) |
|
|
Temperature Sensor (MS_HW_TEMPERATURE ) |
|
|
Search Results for {{siteSearch | truncate:'50'}}
{{resultArray.length}}
No results.