Back to the list of connectors

NetApp 7-Mode Filer (REST)

Description

This connector discovers the enclosure and the disks of NetApp disk arrays (filer) in 7-mode as well as various environment sensors (temperatures, fans, power supplies, etc.). It relies on the REST API protocol.

Connector file name: MS_HW_NetAppREST7Mode.hdf

This connector is superseded by:

Target

Typical platform: NetApp

Operating system: Storage System

Prerequisites

Leverages: NetApp REST API

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The NetApp 7-Mode Filer (REST) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The HTTP Request below to the managed host succeeds:
    • POST /servlets/netapp.servlets.admin.XMLrequest_filer
    • Request Body:
    • The response body contains: partner-system-id (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Model
  • Serial Number
  • Type
  • Vendor
Fan (MS_HW_FAN)
  • Status
    Logical Disk, RAID (MS_HW_LOGICALDISK)
    • Status
    • Size
    Network Card, FC Port (MS_HW_NETWORK)
    • Link Speed
    • Link Status
    • Status
    • Device Type
    • Physical Address
    • Physical Address Type
    Other Device (MS_HW_OTHERDEVICE)
    • Status
      Physical Disk (MS_HW_PHYSICALDISK)
      • Status
      • Additional Information 1
      • Additional Information 2
      • Firmware Version
      • Model
      • Serial Number
      • Size
      • Vendor
      Power Supply (MS_HW_POWERSUPPLY)
      • Status
      • Additional Information 1
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
        Keywords:
        hardware hdf patrol connectors
        No results.