Back to the list of connectors

Oracle/Sun ILOM (SNMP)

Description

This connector enables hardware monitoring for the Sun/Oracle Blade servers with ILOM cards via SNMP.

Connector file name: MS_HW_SunILOMSNMP.hdf

This connector is superseded by:

This connector supersedes:

Target

Typical platform: Oracle/Sun

Operating systems: Out-of-Band, Storage System

Prerequisites

Leverages: Sun/Oracle ILOM SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Oracle/Sun ILOM (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get on the OID 1.3.6.1.4.1.42.2.70.101.1.1.2.1.5.1 must return a non-empty value

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Status
  • Additional Information 1
  • Additional Information 2
  • Model
  • Serial Number
  • Vendor
Processor (MS_HW_CPU)
  • Status
  • Additional Information 1
Fan (MS_HW_FAN)
  • Speed
  • Status
  • Additional Information 1
  • Alarm Threshold
  • Warning Threshold
Memory Module (MS_HW_MEMORY)
  • Status
  • Additional Information 1
  • Model
  • Serial Number
  • Size
  • Vendor
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Additional Information 1
  • Device Type
Physical Disk (MS_HW_PHYSICALDISK)
  • Status
  • Additional Information 1
  • Model
  • Vendor
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
Temperature Sensor (MS_HW_TEMPERATURE)
  • Status
  • Temperature
  • Additional Information 1
  • Alarm Threshold
  • Warning Threshold
Voltage Sensor (MS_HW_VOLTAGE)
  • Status
  • Voltage
  • Additional Information 1
  • Lower Threshold
  • Upper Threshold
Keywords:
hardware hdf patrol connectors
No results.