Back to the list of connectors

Oracle/Sun ILOM (SSH)

Description

This connector enables hardware monitoring for Sun blades with ILOM cards via SSH.

Connector file name: MS_HW_SunILOMSSH.hdf

This connector is superseded by:

This connector supersedes:

Target

Typical platform: Oracle/Sun

Operating system: Out-of-Band

Prerequisites

Leverages: Sun/Oracle ILOM

Technology and protocols: System Commands

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Oracle/Sun ILOM (SSH) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: show /SYS -d properties
    • Output contains: product_name (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Model
  • Vendor
Processor (MS_HW_CPU)
  • Status
  • Model
  • Vendor
Memory Module (MS_HW_MEMORY)
  • Status
  • Model
  • Vendor
Physical Disk (MS_HW_PHYSICALDISK)
  • Predicted Failure
  • Status
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Status
    • Temperature
    • Alarm Threshold
    • Sensor Type/Location
    • Warning Threshold
    Voltage Sensor (MS_HW_VOLTAGE)
    • Status
    • Voltage
    • Lower Threshold
    • Upper Threshold
    • Voltage Type
    Keywords:
    hardware hdf patrol connectors
    No results.